Tactile door signs with the Braille letter

Tactile door signs with the Braille letter

Tactile door signs with the Braille letter are an integral part of informatics or the continuation of informatics, they contain information on the classical and Braille letters that are listed on the Orientation Plan, which are the number and the purpose (name) of the room ...

Tactile door signs with the Braille letter can be made of metal or plastic plates, with engraved number of rooms and the name of the purpose of the room, classical and Braille letters. The engraved plates have a raw color of the metal surface and as such they get a dark patina oxidation during time, and the plastic plates are black. For this reason, the plates are subsequently lacquered with two-component high-quality lacquers (silver, gold, white ...) depending on the interior, and can be gloss or matt surfaces. This way designed and processed tactile door signs with the Braille letter meet very high aesthetic standards, as well as the complete information function for blind, sand-blind and normal vision persons. 

Usually formats are 16x3cm, 18x5cm, and can be larger if needed.

Provide room information i.e. its purpose. This way designed tactile door signs with the Braille letter are ergonomically adapted for finger exploitation by touching and so on. They are very stable and steady, in normal use, they can not be weared or damaged, without limited shelf life, resistant to all weather conditions, and for metals it should be stated that they are resistant to extreme mechanical influences and are highly representative.

They are placed at the door. Each plate is glued with two-sided adhesive 3M assembly tape of exceptional strength, resistance and durability in exploitation. They are mounted simply by removing the protective film from the assembly strip, gluing them on the cleaned and degreased door base.

Mostly, plates are made for the rooms that are, marked - numbered, on the Orientation Plan of the floor...

It approaches to the drawing and development of the 1: 1 film engraving plan and it is submitted for review and approval to the customer in electronic form. According to the approved drawing, the plates are engraved, made, lacquered ...

The above-mentioned production process conditions a longer period of construction, especially for buildings with a lots of floors and entrances...

They can be cleaned with standard hygiene products that are diluted and rinsed with water without any consequences. During the cleaning, use soft brushes and soft cloths so that the lacquered layer will keep its glaze for as long as possible.